Description
Waterproof DMX512 decoder with IP67 rating, suitable for outdoor and damp environment.
Comply with the DMX512/RDM standard protocols.
Digital numeric display, set DMX decode start address by buttons.
1/2/4 DMX channel output selectable.
PWM frequency 2000/500Hz selectable.
Logarithmic or linear dimming curve selectable.
Stand-alone RGB/RGBW mode and 4 channel dimmer mode selectable,
which be controlled by buttons with built-in programs, instead of DMX signal.
Over-heat / Over-load / Short circuit protection, recover automatically
TECHNICAL DETAILS
Input voltage: 12-36VDC
Output voltage: 4 x (12-36)VDC
Output current: 4CH,5A/CH
Output power: 4 x (60-180)W
Output type: Constant voltage
IP rating: IP67
Mechanical Structures and Installations:
Wiring Diagram:
System parameter setting:
Long press SETUP key for 2s, prepare for setup system parameter:
decode mode, output PWM frequence, output brightness curve, automatic blank screen.
then short press SETUP key to switch four item.
Decode mode: short press ◀ or ▶ key to switch 1/2/4 channel decode mode("d-1","d-2" or "d-4"). When set as 1 channel
decode, the decoder occupy only 1 DMX address, and four channel output the same brightness of this DMX address.
Output PWM frequence: short press ◀ or ▶ key to switch 500Hz("F-L") or 2KHz("F-H").
Higher PWM frequency, will cause lower output current, higher power noise, but more suitable for camera(No flickers for video).
Output brightness curve: short press ◀ or ▶ key to switch linear curve("C-L") or logarithmic curve("C-E").
Automatic blank screen: short press ◀ or ▶ key to switch enable ("bon") or disable("boF") automatic blank screen.
Long press SETUP key for 2s or timeout 10s, quit system parameter setting.
