Description
The DMX512 & RDM decoder D24 which features full support to the latest DMX512 protocols, is designed with 24 channels output. RDM bi-direction communication function enables the DMX512 master console to detect and display decoder information and set DMX address. A variety of features can be set via the numeric digital display and the buttons such as DMX address,DMX decoding mode,PWM output frequency and dimming curve value.
TECHNICAL DETAILS
Output signal: DMX
Working voltage: 5-24VDC
Working current: 24CH,3A/CH
Output voltage: 5-24VDC
Standby time: 12 months
Remote distance: 30m
Working temperature: -30℃~55℃
Dimension: 149*88*60mmDimension
Feature:
Din rail mounted DMX512 decoder with 24 channel constant voltage output.
DMX decode mode / Stand-alone RGB mode / Stand-alone 24 channel dimmer mode.
Standard DMX512 compliant interface, DMX address display, set DMX address freely.
Comply with the latest DMX512, DMX512(1990), DMX512-A, RDM V1.0 (E1.20 - 2006 ESTA Standard) standard protocols.
RDM bi-directional communication function, can realize intercommunication between DMX master and decoder. for example, you can set DMX decoder address by DMX master console.
Compatial with our DMX master and any high quality DMX master from other supplier.
Under stand-alone 24ch RGB controller mode, have 4 kinds dynamic mode.
Under stand-alone 24ch dimmer mode, each channel adjust brightness independently, and save up to 8 groups brightness.
High or low PWM frequency optional.
Log or linear dimming curve optional.
Work with power repeater to expand output unlimitedly.
Din rail or screw mounted optional.
Mechanical Structures and Installations
Wiring Diagrams
Note:
1. An DMX signal amplifier is needed if more than 32 decoders are connected, or use overlong signal line, signal amplification should not be more than 5 times continuously.
2. If the recoil effect occurs because of longer signal line or bad line quality, please try to connect 0.25W 90-120Ω terminal resistor at the end of each line.
